Page 1 of 1
ZD30 Head Removal
Posted: Tue May 20, 2008 2:36 pm
by sir03
I have got a 2003 GU Patrol with the ZD30 in it. The motor has developed a rattle in the top end, and my mechanic is telling me that the engine needs to be removed from the car, before they can remove the head.
Is this correct?
Sorry if this has been covered before, but I had a quick look and couldn’t find any information about it.
Thanks for your help.
Posted: Tue May 20, 2008 4:01 pm
by Dzltec
No it doesnt have to be removed from the vehicle to remove the head. Its not a 5min job, its also not a cheap jop.
Be prepared.
Andy
Posted: Tue May 20, 2008 4:51 pm
by mkpatrol
Dzltec wrote:No it doesnt have to be removed from the vehicle to remove the head. Its not a 5min job, its also not a cheap jop.
Be prepared.
Andy
Technology = $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Posted: Tue May 20, 2008 5:15 pm
by bogged
drained the sump yet and checked for bits of piston?
Google the ZD30 will get you lots.
start here.
http://www.patrol4x4.com/forum/