Outer Limits 4x4 Board

Ok ive got hot gear oil smell from rh hub, now do i have to replace the wheel brg assy to replace the axle seal.

I seem to remember that the axle seal is outboard of the bearing???

Anybody.

MAtt

There are two seals, one in the diff housing that seals on the smaller part of the axle & one that seals between the bearing and the axle flange. In most cases the inner seal is all that needs replacing, I did this with mine 4 years ago & it is still going strong (if you do this make sure you repack the wheel bearing as the oil removes the grease, I used a small grease gun with a pointy adaptor).

If this doesnt work then you need to replace the outer as well which will also require the bearing to be replaced as you usually bugger the bearing getting it off the axle. In any case if you are going to the trouble to remove the bearing you might as well replace it anyway.

I realise that the outer seal on mine is probably buggered as the oil was getting out but until the bering craps Im not going to touch it.

So i should be able to tell if the outer seal is leaking hey,ive got a new bearing and seals here buit if i only have to replace the inner one then thats better for me.

MAtt

The outer sea is already leaking now but without the adittion of the oil into the bearing cavity it seems to settle down again, the outer seal is really only a dust seal to keep stuff out, from memory it is double lipped.

Ok cool so without the oil it has no trouble keeping the bearing graese in and dust and crap out.

Ill order two new seals and tackle it on the weekend.

Matt