Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front diff driveshaft bush, worried

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Front diff driveshaft bush, worried

Post by scooby_74 »

Pulled out my lh drive shaft out to replace my cv's, the lh inner had dammage where its been spinning inside the housing.
There is obviously a bush there which did seem a little rough. All i had time for was to clean it with some emery tape and reasemble the new cv into the housing.
Is this a huge concern, should i be stripping the centre and replacing the bush, free wheel hubs or just turning a blind eye to what i saw.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Posts: 8
Joined: Tue Apr 29, 2008 8:36 pm
Location: Geraldton

Post by pajero66 »

there is supposed to be a neddle roller bearing in there. they are usually buggered and only about $30 from mitsubishi
cheers murray
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest