Page 1 of 1
80 sahara front locker into standard 80
Posted: Tue May 27, 2008 10:09 am
by RAY185
Does the front 80 series sahara factory electric locker centre fit into the standard 80 series (GXL) front housing? I've heard the centre is larger and doesnt fit into the housing without maching. Also heard the stud pattern does not match. Can anyone confirm?
Posted: Tue May 27, 2008 11:41 am
by RUFF
The housing needs to be modified.
Have a look here. Its an install into a hilux but the same mods need to be done on the 80 housing-
http://67.122.16.97/carterman/4runner/mods/locker/
Posted: Tue May 27, 2008 12:13 pm
by RAY185
Thanks for confirming Tony.
Posted: Tue May 27, 2008 12:46 pm
by dow50r
Big job....you would need to get the locker cheap to make it worth while, comparison to ARB or the like, which are bolt in....there is also alot of wiring frigging to make the factory one work too...Andrew
Posted: Tue May 27, 2008 5:55 pm
by udm
i have done it to my 80, it isnt hard if you got the know how.
but as dow5r said, you would have to be getting the lockers cheap enough to even bother modding (i got front for 500 and complete rear axle for 700
)
the electricals, if you want them to work factory like, it isnt an easy job.
this is the notch that has to be cut out (right hand side), and the stud pattern does change, 4 new holes have to be drilled and tapped.
http://i34.photobucket.com/albums/d122/ ... ont_21.jpg
btw, now that we are on the subject, does anybody know if the gears for open and elocker diffs are the same? aka interchangable
Posted: Tue May 27, 2008 6:48 pm
by RAY185
Yeah the elocker isnt quite cheap enough to warrant the mods unfortunately. Thanks for the replies.