Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gme 3200 Problem with sending signal

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 50
Joined: Tue Aug 16, 2005 9:23 pm
Location: Wollongong, NSW

Gme 3200 Problem with sending signal

Post by Droid2 »

HI all,

posting this one for a mate,

His got a 3200, was working fine,
now has issues.

if he talks to us on uhf if like he is wispering,
but when we talk to him its normal
so in a nut sheel,

the 3200 has a probelm sending signal,

Is their anything that goes wrong with them?
or something i can test or change? can i get replacement parts for him?

also we have tried it in differnent cars using different antennas, same prob.

Any help would be great,

Cheers
GQ//6" lift//2" Body//37" M/T//fnt+rear arb lockers//arb bar work// Gme3200// + Car seats x 3
Top
Posts: 214
Joined: Fri Jul 16, 2004 10:23 pm
Location: Brisbane, Aus.

Post by barbz »

i had a similar issue on my last trip - when i got home i just pulled the microphone apart bit of inox and a clean put it back together and works a treat now.

Cant hurt to try.
Paul
Top
Posts: 50
Joined: Tue Aug 16, 2005 9:23 pm
Location: Wollongong, NSW

Post by Droid2 »

no worries, sound like a plan, dont think we've tried this one yet.
Willgive it a go later, cheers
GQ//6" lift//2" Body//37" M/T//fnt+rear arb lockers//arb bar work// Gme3200// + Car seats x 3
Top
Posts: 50
Joined: Tue Aug 16, 2005 9:23 pm
Location: Wollongong, NSW

Post by Droid2 »

all fixed,

was mic,
had dry joints and mic stuffed,
replace mic and resolders all joints, then
soldered all joint on uhf,

Fixed!

Cheers
GQ//6" lift//2" Body//37" M/T//fnt+rear arb lockers//arb bar work// Gme3200// + Car seats x 3
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests