Outer Limits 4x4 Board

DIAL UP BEWARE all pics are at 640x480 but there are lots of them.

Im going to need to make a set of these on my 45 so thought i would see if anyone has any other pics i dont have. Some really good ideas in these pics-

Most of these have come from Pirate or ih8mud. Some are also unfinished pics.

The line on the top of this set is prob my favourite

Thats all i got untill i get around to starting on my 45.

they are all pretty similar wouldn't you think..

i can't say i like the look of this style tho.. its too much like a heep


my personal favorites are still the ones Matt uses.. (sorry.. not the most flattering pic.. but the first one 1 found)


on a shorty it would be nice to tie it into the sliders and then all the way back to protect the rear of the tub..

yer i like that last set. but i would like to see a way of it done where there is protection of the motor ect.
Any ideas?

Matt_88 wrote:yer i like that last set. but i would like to see a way of it done where there is protection of the motor ect.
Any ideas?

You mean from dirt/mud etc? As long as you dont cut them up higher than the stock guard you could possibly modify the original inner guard to still fit. And i think it wouldnt be too much work to make a custom inner on anything higher than stock.

i pretty have all the same pics on my computer here, as ill be making something similar in the next couple of months, with any luck it all works out for us, be good to see how yours turn out Ruff,

when are you starting them?

Here's mine.

shorty_f0rty wrote: my personal favorites are still the ones Matt uses.. (sorry.. not the most flattering pic.. but the first one 1 found)

The truck was a right off but the sliders survived, stood up real well to the impact and bolted stright on when we swapped them over.






More pics here
http://s81.photobucket.com/albums/j212/ ... D/SLIDERS/
Built and designed by DaveJB

Lol look like you have the same collection of pics as I do.

There are a few more in my 40 series gallery at

http://www.corpics.com/40SeriesPics

I think I preffer the ones that look like factory.

how about something like this?

shorty_f0rty wrote:how about something like this?

That looks like a stock guard with a piece of tube added just to the front and part of the side. Looks good. And i guess it would be stronger than stock but im going to need mine way wider than stock to cover the 80 series diffs. Im also wanting to make them easily removable. Possibly just 3 bolts and they are off.

RUFF wrote:

shorty_f0rty wrote:how about something like this?

That looks like a stock guard with a piece of tube added just to the front and part of the side. Looks good. And i guess it would be stronger than stock but im going to need mine way wider than stock to cover the 80 series diffs. Im also wanting to make them easily removable. Possibly just 3 bolts and they are off.

Hey Ruff, mine on the old comp troopy were removable, but my computer died last week and lost every bit of data on the hard drive so i can't post any pics unfortunately.......

Some that I had, not many close ups, but still good for ideas.








I like the matching rear tube fenders on this one.

awesome selection of pix there twisty.. mind passing the tissues!?!

now i need to learn to weld

ripper thread, ill be doing this on my 47 if i ever get it started...

i got a troopie LOL! (but itll become a ute)



good thread Ruff,

metaltech does killer work

Medusas rig (the red 45 is also really nice work)

DAZ`s were not real pritty but they were removable
http://www.3rdrock4x4.com/forum/viewtopic.php?t=210

My ones

rear ones probably not relevent

This one has some nice inner guards.

The colours of this thing almost make me sick.