Page 1 of 1
cutting up a zook, what can be reused?
Posted: Fri May 30, 2008 1:17 pm
by j-top paj
what non "bolt on/off" panels etc.. are usefull/sort after on a zook?
the last zook i cut up, someone wanted the rear floor to extend theirs.
and someone else wanted the A pillars.
what else can be reused on another zook?
Posted: Fri May 30, 2008 3:27 pm
by 86slowsierra
Wouldn't it be just about anything thats not rusted?
Straight sills, quarter panels.
Are you really asking " what non "bolt on/off" panels etc.. do people want? " ?
Posted: Fri May 30, 2008 4:23 pm
by alien
if its a soft top the sliders on the targa bar and the channel at the top is hard to come by at a wrecker...
Posted: Fri May 30, 2008 4:29 pm
by just cruizin'
What are you cutting off, is the rest of the body OK, if you only need the front section get another body with a stuffed rear and sell the good full body they are getting hard to find
Posted: Fri May 30, 2008 8:07 pm
by built4thrashing
It doesnt take much to cut a sierra in half. me and a mate cut one just before the b pillar with 1/2 a 4 inch grinder disc.
Posted: Fri May 30, 2008 10:26 pm
by dad
i thinks he's cutting up an immaculate tin top *cringe*
Posted: Sat May 31, 2008 1:23 am
by j-top paj
dad wrote:i thinks he's cutting up an immaculate tin top *cringe*
yeh pretty much
the doors, bonnet and front clip are getting picked up in a few hours so i dont want half a car sitting in my driveway for too long, it will look like shit
so id like to get rid of whats left ASAP
Posted: Sat May 31, 2008 1:26 am
by j-top paj
built4thrashing wrote:It doesnt take much to cut a sierra in half. me and a mate cut one just before the b pillar with 1/2 a 4 inch grinder disc.
yeh i know, the other one we cut up on AUS day didnt take much.. but there was a fair bit of rust in every panel so not much was salvagable...
this one is in good cond so i dont want to cut it up if there are parts that can be used and are usefull to someone
Posted: Sat May 31, 2008 1:29 am
by j-top paj
alien wrote:if its a soft top the sliders on the targa bar and the channel at the top is hard to come by at a wrecker...
nah its a hardtop. i know soft tops are easy to pull apart and most/all panels can be unbolted.
im looking at parts that cant be unbolted. parts that need to be welded back in etc...
because if not much is usefull it will probably be cut up by next weekend and in the bin.
id prefer to be able to help someone out rather than throw it away
Posted: Sat May 31, 2008 2:18 am
by ofr57
if you want to split it up i would pop the seems and take the roof off ... i could almost GARENTEE someone will need it
Posted: Sat May 31, 2008 9:32 am
by ScrawnC
I'd come grab the whole thing if I lived closer!!!! What do you want for it? Are you modding or just getting rid of it?
Posted: Sat May 31, 2008 5:48 pm
by built4thrashing
the soft top we cut in half is being used to make a camping trailer. would have used a Hard top but this was just the right price.
Posted: Sun Jun 01, 2008 11:11 pm
by j-top paj
built4thrashing wrote:the soft top we cut in half is being used to make a camping trailer. would have used a Hard top but this was just the right price.
i was actually thinking that this arvo.
had an idea of putting a bed in it and storage drawers under it.
and where the engine was id put some water/fuel tanks or something..
but i have too many projects ATM so it would probably sit there for a while
Posted: Sun Jun 01, 2008 11:12 pm
by j-top paj
ScrawnC wrote:I'd come grab the whole thing if I lived closer!!!! What do you want for it? Are you modding or just getting rid of it?
getting rid of it.
Posted: Mon Jun 02, 2008 9:40 am
by Gwagensteve
Cut the floor, tunnel and internal sill sections out. I've had to replace the floor in a sierra from rust - I can't be the only one.
Normally you'll only need the floor up to the seat mounts.
Steve.