Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

camper trailer brakes what is better???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 79
Joined: Tue Jun 19, 2007 9:52 pm
Location: Darwin

camper trailer brakes what is better???

Post by 4runnernomore »

Hi all,

I have purchased a Cub Camper and wil be picking it up later this year.

What is the best brakes to use, electric or Hydraulic disc overide?

I know there are advantages and disadvantages for both. I will be using it behind two different vehicles though pending distance and terrain travelled.

I like the idea of electric but it will be a pain wiring up two cars. Is it worth it or stick with the over rides.

Love to hear your experiences comments.

Cheers, Chris
Posts: 101
Joined: Mon Jun 20, 2005 4:38 pm
Location: glenmore park

Post by 75 cruiser »

I picked up my drover 007 spacematic in april and i opted for the Hydraulic disc overide.It travels no problems at all.I went down a winding hill offroad and all was fine!
Posts: 265
Joined: Wed Jan 09, 2008 3:18 pm
Location: Mt Evelyn.Vic

trailer brakes

Post by BOGFROG »

Wiring up is easy if you use a 4 pin plug for back of unit you can use same unit on each car its only 1 x positive (black) via a ciruit breaker & 1 x negative (white) to battery then one to activate the unit (red) off the brake wire the other one (blue) goes to the trailer plug pin 5 worse part is getting thru the fire wall, should only take 45mins to do each car no stress! ;)
Suzuki Sierra: half the size, half the weight, half the cost & twice the fun :lol: why would you drive anything else?
Frog Build up:
http://www.outerlimits4x4.com/ftopic145665.php&highlight=frog
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i agree with the eletric option, so far i have wired up 3 4bys with eletric brakes, and they all work no dramas, id have to say best setup thus far,

i will be putting eletric brakes on the car trailer later in the year,
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Definitely go electric and use a Tekonsha Prodigy or P3 brake controller. You can also get an extra wiring loom and plug and just swap the controller from one vehicle to the next as required.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Electrics are the go, because- in off road situations, descending a steep slippery hill, and the camper starts to push the rear of your 4wd off line, you can independantly apply the camper brakes to straighten everything out again. You cant do this with override brakes, they will only make it worse.
Mud makes excellent toothpaste.
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

Post by ROCKRASH »

Descending a steep hill with over rides - get half way down, realise you are on the wrong line, try to back up, trailer brakes lock even more. Get out to engage the lockout, over ride ram is compressed just enough to stop the lockout disabling the brakes. Go back to the car get spanners, drop fluid, have no brakes. Been there done that, will never ever use over rides off the road ever again. Did I mention ever
Posts: 101
Joined: Mon Jun 20, 2005 4:38 pm
Location: glenmore park

Post by 75 cruiser »

[quote="ROCKRASH"]Descending a steep hill with over rides - get half way down, realise you are on the wrong line, try to back up, trailer brakes lock even more. Get out to engage the lockout, over ride ram is compressed just enough to stop the lockout disabling the brakes. Go back to the car get spanners, drop fluid, have no brakes.

All i done was rolled forward a little bit which took the pressure of the over ride ram enabled the lock out system drove to the bottom of the hill without a drama.
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

BundyRumandCoke wrote:Electrics are the go, you can independantly apply the camper brakes to straighten everything out again. You cant do this with override brakes, they will only make it worse.
Head this advice! May not be related, but when I used tow a car on a trailer, the electric brakes saved heaps of "jack-knife" situations for me.

It became automatic, at high speed, down hill on a bend, I always moved my hand into a position to operate the trailer brakes if required.

75 cruiser wrote:All i done was rolled forward a little bit which took the pressure of the over ride ram enabled the lock out system drove to the bottom of the hill without a drama.
This works, but sometimes you have to get out and chock the trailer wheels to go forward (because of the down hill and trailer weight), to release pressure from the hitch to flip the over-ride disable in.
I'm the sharpest tool in the shed!
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Yep electric is the go , another senario slippery clay up hill ,
that you need momentum to get over. If you don,t make the top with overides the trailer will drag you back down the hill and probly off the side,
overide don,t work in reverse . Electric do but usually a little less then in foward .
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest