Outer Limits 4x4 Board

anybody put a h150 from a standard 80x into a hzj100x
do they go straight in or does the gearbox mount have to be changed
i am gyessing that the tailshafts shall be modded
just asking bout the crossmember

Overall length is the same, so tailshaft should be OK.

You will need to change the t/case or at least the input gear as the splines are different.

Also need to check the position where the lever exits the box as it appears there's some differences there.

The shifter is different, if you can get a petrol 100 one, that is all you need for the box...then its input shaft on the transfer or an 80 transfer box...

thanks andrew /greg
i should have been a little more specific
the h150 if box and t/case from a part time 80x
so from the above it will bolt straight in with only the shifter to change
looking to buy a 100x and put the box into it to have a stronger box