how hard
Posted: Tue Jun 03, 2008 5:20 pm
how hard is it to fit hilux diff to a zook
Page 1 of 1
Posted: Tue Jun 03, 2008 5:21 pm
Probably easier than fitting the zook diff to a hilux
Posted: Tue Jun 03, 2008 6:09 pm
Grinder, Welder, Alot of knowledge before starting the project. Including engineering, Tyres to run etc etc
Posted: Tue Jun 03, 2008 6:50 pm
how hard is it to drive though gravity
with or without the aid of a hiclone
with or without the aid of a hiclone
Posted: Tue Jun 03, 2008 7:13 pm
Lots of helpful responses.. although I am tempted to say SEARCH.
What model zuk? From what Ive heard fronts almost bolt in w/t but n/t will need the chassis mounts cut from the chassis and moved out (good time for ruf) . Rears on both reguire spring pads on diffs cut off and moved to suit springs.
Brakes bolt up but need extending, Im told gq master cylinder will greatly help braking but not nessacery.
Drive shafts bolt up with minor mods, upper shock mounts in front and lower in the rear need welding on.
Best talk to an engineer first to see what they require.
Nik
What model zuk? From what Ive heard fronts almost bolt in w/t but n/t will need the chassis mounts cut from the chassis and moved out (good time for ruf) . Rears on both reguire spring pads on diffs cut off and moved to suit springs.
Brakes bolt up but need extending, Im told gq master cylinder will greatly help braking but not nessacery.
Drive shafts bolt up with minor mods, upper shock mounts in front and lower in the rear need welding on.
Best talk to an engineer first to see what they require.
Nik
Posted: Tue Jun 03, 2008 8:19 pm
definintely talk to an engineer - and consider why you want the lux diffs - keeping in mind WT zuk diffs on 31's have the same ground clearance as lux diffs on 33's... will your engineer or local govt. allow you to run that tyre size? etc etc..