Page 1 of 1
re rangie rims
Posted: Wed Jun 04, 2008 11:13 pm
by yarrum
Hi guys
Just after the offset of rangy/ disco factory mags.
About to buy a set of 33x12.5s .and wonder if will fit .
noticed that slunnys disco has 34/11.5s on rangy mags
any help would be great
cheers
Posted: Thu Jun 05, 2008 8:23 am
by 86MUD
I doubt very much if standard rangie rims will fit 33 x 12.5 tyres.
just buy black steel rims (15 x 8 + 25mm offset) from Fourby's at $100 each.
cheers
Andrew
Posted: Thu Jun 05, 2008 10:42 am
by 4.42doormangierangie
hey, Ive just put 33 x 12.5 x 15 on a a set of 8 x 15 inch sunnies. witht the correct offset from a tire joint in frankston vic. 89 bucks each. they work fine. you wouldnt want to put a 12.5 on anything less than an 8.
Re: re rangie rims
Posted: Thu Jun 05, 2008 12:00 pm
by Simo63
yarrum wrote:Hi guys
Just after the offset of rangy/ disco factory mags.
About to buy a set of 33x12.5s .and wonder if will fit .
noticed that slunnys disco has 34/11.5s on rangy mags
any help would be great
cheers
I've got a set (5) of 16 x 8 inch rims for sale to suit a Rangie. These are new to the extent they had tyres fitted but were never fitted to the car.
I'm on the Sunny Coast if you are intereted, PM me.
Posted: Thu Jun 05, 2008 3:40 pm
by def90
hey yarrum if you go to fourby's talk ryano off this forum, i think i got my 15x8 sunnies (black dynamics) for $80/each pretty big offset i think they are at least a 3" backspace 5" to the outer edge, hhmmm is that + 25mm offset? i always get confused. i have a lesser offset on my play tyres and they still work well
Posted: Thu Jun 05, 2008 6:08 pm
by yarrum
I have 34/10.5 JT2s on mangels 15x8 wit have no offset they are 230mm wide and the mounting face is 115 that meens no offset i think
and on the rangie at full travel full lock they just hit the control arms
So for 33/12.5s will need a good 2.5 to 3'' off set
dos that sound right
Posted: Fri Jun 06, 2008 5:06 pm
by sam.ossie
hey guys i just brought a set of 16x8 with a negative 25 offset to go with my 35's full lock just mises the control arms wouldn't recommended anything less then that offset.
Posted: Fri Jun 06, 2008 5:50 pm
by yarrum
cheers mate
will look into it