Outer Limits 4x4 Board

My timing chain cover on my 6.5lt GM Diesel has decided to rip itself apart thanks to a power steering pump that was bolted to it.

Does anyone know where I can get another or someone in Sydney (perfer Campbelltown/Liverpool area) that would be able to weld the alloy cover back together?

Mate try eagle auto parts in revesby they will have what you need.

www.eagleautoparts.com.au

i could also ask them down here to if ya like got nothing beter to do ,

If you can afford to wait a couple of days for it to arrive I've found www.findapart.com.au pretty good in the past.

Try Classic Chevy Centre 67 Long St Smithfield 2164
ph (02) 9609 7228
I buy my parts for a 6.2L for about 60% of what other
places charge.

allah69 wrote:Try Classic Chevy Centre 67 Long St Smithfield 2164
ph (02) 9609 7228
I buy my parts for a 6.2L for about 60% of what other
places charge.

I give them a try and if no luck then maybe eagle.

Matt, thanks for the offer.

How repairable is yours?
If you can't get hold of a replacement, I'm in narellan and can weld al if it's not to complicated.

festy wrote:How repairable is yours?
If you can't get hold of a replacement, I'm in narellan and can weld al if it's not to complicated.

PM'd you :-)

Found one in OZ... $480

http://www.suburbanimports.com.au/index.html

These guys are at Brookvale.

here dad

brunswick diesels in WA also may have parts,

what do you think about marks adaptors? here in vic?


also just make sure before you weld ally to clean allll crap off it other wise it will look as good as your stick welding and nothing will stick
get it tig welded too

You could try dewars performace engines in tangambalanga. Sorry dont have the number but they do heaps and heaps of chev diesel stuff.

Dewars 02 60273433

is it the same as a chev petrol V8 one? chances are high. should be cheap as chips off fleabay etc.