Page 1 of 1
Crown Wheel & Pinions
Posted: Wed Jun 11, 2008 8:42 am
by Britswed
I know it's been asked a many a time
What brand are people using??
Whats strong??
Ill stay with my standard gearing as my motor has the grunt.
Etc Etc
Words of wisdom appreciated
Mal
Posted: Wed Jun 11, 2008 9:59 am
by cloughy
Nissan
KAM gears
crown wheel and pinion
Posted: Wed Jun 11, 2008 6:54 pm
by hangover
Hi Mal, how did u go in outback challange. Gary.
Posted: Wed Jun 11, 2008 9:08 pm
by jbell
I've just got a set of 4.7's from great basin rovers in the u.s.
they're getting fitted this week, so I'll let you know in a couple
of weeks after a trip or 2. I'm running 35 krawlers [bfg]
Jeff
Posted: Wed Jun 11, 2008 9:16 pm
by shakes
cloughy wrote:Nissan
KAM gears
just looked on the kam website.
$$$ by the time you get em out ere.
Posted: Wed Jun 11, 2008 10:09 pm
by cloughy
shakes wrote:cloughy wrote:Nissan
KAM gears
just looked on the kam website.
$$$ by the time you get em out ere.
Just under $700 a gearset when I bought mine years ago, now I have to pull them out and go back to 3.54 to suit the 4BD1t
Re: crown wheel and pinion
Posted: Thu Jun 12, 2008 7:49 am
by Britswed
hangover wrote:Hi Mal, how did u go in outback challange. Gary.
Hey Gary mate we ended up 21st after missing 5 stages but got a 2nd & 5 top tens ooh well always next year
Mal
Posted: Thu Jun 12, 2008 7:51 am
by Britswed
Will end up getting ashcroft ones as i can sorce them and get them here at a good price & will "pin"the crown wheel as well.
Mal
Posted: Thu Jun 12, 2008 6:45 pm
by shakes
cloughy wrote:shakes wrote:cloughy wrote:Nissan
KAM gears
just looked on the kam website.
$$$ by the time you get em out ere.
Just under $700 a gearset when I bought mine years ago, now I have to pull them out and go back to 3.54 to suit the 4BD1t
what ratio??
you might have sold em when I get my tax back
Posted: Thu Jun 12, 2008 8:01 pm
by cloughy
shakes wrote:cloughy wrote:shakes wrote:cloughy wrote:Nissan
KAM gears
just looked on the kam website.
$$$ by the time you get em out ere.
Just under $700 a gearset when I bought mine years ago, now I have to pull them out and go back to 3.54 to suit the 4BD1t
what ratio??
you might have sold em when I get my tax back
Nah, gonna hoard these
Posted: Thu Jun 12, 2008 8:48 pm
by fnukle
jbell wrote:I've just got a set of 4.7's from great basin rovers in the u.s.
they're getting fitted this week, so I'll let you know in a couple
of weeks after a trip or 2. I'm running 35 krawlers [bfg]
Jeff
Where from and how much?
Posted: Thu Jun 12, 2008 9:04 pm
by RangingRover
http://www.rovacraft.com.au/newproducts.html
Not sure what brand these are, but Rovacraft import containers of goodies from the UK - including QT radius arms, among other things. And considering they have exactly the same photo as on the Ashcroft Transmissions site, I suspect they are likely Ashcroft gears, but you'd want to check that. They may also bring in other ratios...
Posted: Fri Jun 13, 2008 7:32 am
by 86MUD
I've had 4.11 installed for just over 18 months and had no issues. They were from ashcroft...they were delviered to my door in Brisbane about 7 days after ordering.
Cheers
Andrew
Posted: Fri Jun 13, 2008 10:26 pm
by jbell
fnukle look up greatbasinrovers.com they were $1000 + freight
for 4.7's . freight was in my bag as I was there on holi's.
mine are getting pegged also, so they should be as strong a rover
as you can get.
Jeff
Posted: Sat Aug 02, 2008 11:03 am
by Britswed
Well got my diff back the other day new Crown wheel and pinion and its been pegged using two brass bush's,so will see how it goes in the future
Mal
[/img]
Posted: Sat Aug 02, 2008 12:42 pm
by Slunnie
Good stuff Mal! Hope all has been going well.
Who did the pegging?
Posted: Sat Aug 02, 2008 2:28 pm
by Britswed
Slunnie wrote:Good stuff Mal! Hope all has been going well.
Who did the pegging?
Hey mate yeah all well and back in the comp scene for now truck will have some improvements over the next few months.
Hornsby Diff & gearbox did the pegging
Mal