Page 1 of 1
Sierra 1300 Conversion
Posted: Wed Jun 11, 2008 5:01 pm
by SierraHarro
I have a 1993 Sierra the 1300 currently installed has basically died, I want to put a bigger engine in, what engines will fit straight onto the current engine mounts? Am I able to simply do a front cut conversion or do I have to do a full conversion? Any help would be appreciated.
Posted: Wed Jun 11, 2008 5:16 pm
by flyinwall
always wanted to do this..................SEARCH!!!!!!!!!!!!!............................... its in the bible
Posted: Wed Jun 11, 2008 5:17 pm
by want33s
Welcome to the forum.
If you had a read through the Bible you'd see that the only engine that bolts straight into a 1.3 car is a 1.3.
1.6 Vitara/Baleno/Swift will bolt in with an adaptor kit as will just about any small 4 cylinder.
Depends how much work you want to do.
Search or be prepared to be flamed.
Jas.
Posted: Wed Jun 11, 2008 8:58 pm
by GRPABT1
Search noob.
Posted: Thu Jun 12, 2008 2:38 pm
by SierraHarro
Sorry for my n00bish post, but thanks for your help Jas. Have found what I need in the 'bible' cheers.