3L Hilux oil pressure thread
Posted: Thu Jun 12, 2008 9:58 pm
I've just been trying to fit the oil pressure gauge to my 3L 2.8ltr diesel Hilux. The gauge mounting is easy, wiring easy, the VDO adaptor (t piece) appears to be the same thread however the original sender unit has a slight taper on the end. The VDO unit will not screw in 
Any one else had this issue? The doofus at Autobahn says it's the only one he has listed for a Hilux diesel, the original sender also screws into the adaptor quite easily in the female ports.
Any one else had this issue? The doofus at Autobahn says it's the only one he has listed for a Hilux diesel, the original sender also screws into the adaptor quite easily in the female ports.
