Outer Limits 4x4 Board

Would any one be interested in buying a bar like this. Can make it to suit a low mount winch and any amount of body lift. The first one has two 50mil tubes on each side. Second one has 75mil on top and 42mil on the bottom. All with 5mil wall thickness. Top tubes on both are only made from exhaust pipe to keep the weight down. You can put lights ,Cb aerials or winch rope horns on top. Probably be around 700 bucks powder coated for the basic bar with number plate holder. Any feed back would be ace. Note. there is no AC condenser on my car so it will stick out further to clear everything if you have ac.
CHEERS
BRAD

would that also go onto a series 1 Disco? they have the same chassis but not sure about the clearance around the front bodywork....

looks ace mate might be keen at a later date when ive got a bit more $$$$

could make one to suit a Disco 1. As long as it doesn't have airbags.

top bar mate, i actually saw a pic of your car a while ago with that bar, i like it. i dont really like my arb front or back at the moment, lots of weight and to bulky.

i can't it properly, but are those eye at the front just for winch applications or can they be used for snatch strap recovery?

but two things...

1. is it possible to have it without a winch fittings?
so i could
2. stick my blitz 240's in the middle

otherwise great job!

They are just normal tow hooks. So you can snatch off them. I can make it a none winch bar if you want.

Can I bribe you into making a rear bar?

Cheers

Andrew

^^ second that motion lol you rear bar i have to say is one of the best i think i have seen

Sorry guys. Not at the moment. They take me so long to make.Especially when i put the lights in. I'm glad you like them though
Thanks

no worries Brad...time is something that I am lacking as well. I have most of the materials at home ready to cut and weld, but I just need to find the time!

Cheers

Andrew