Page 1 of 1
vitara bodylift
Posted: Mon Jun 16, 2008 9:43 pm
by tombutt
hi guys im wanting to do a 2 inch body lift on my lwb vitara its a 1997. i wanted to know what will i have to do to complete the lift.
ie will brake lines need extenting, do gear levers need bending or gear tunnel cutting. does anything in the engine bay need moving.
thanks
Posted: Mon Jun 16, 2008 10:50 pm
by Eddy
shhh!
Quick!!! hit the search button before anyone else sees this!!!
Posted: Mon Jun 16, 2008 10:55 pm
by Eddy
Posted: Tue Jun 17, 2008 3:47 pm
by tombutt
those are all for swb base vechiles and i wanted to know if there was any differnece in doing it between the lwb and swb
Posted: Tue Jun 17, 2008 7:29 pm
by Gwagensteve
No. I've done a few of both.
Steve.
Posted: Tue Jun 17, 2008 7:37 pm
by paulyp
hey iv done a 2inch body lift on my 96 vitara and all i needed to do was remove the sway bar.and install the kit. i checked the brake lines with full flex and they were fine.
Posted: Tue Jun 17, 2008 7:47 pm
by Gwagensteve
Why did you have to remove the sway bar? It's mounted to the chassis?
How tight is the passenger side brake line at full droop?
Steve.