Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Quick Leaf question
Quick Leaf question
if i was to buy a 2 inch lift leaf spring set for my sierra/sj413 can i run the standard shocks??, what else would i exactly need? besides maybe new bushes and u bolts have tried searching the topic but havent come up with anything.... sorry havent been part of this forum for very long..
i would definately replace the bushes while you are at it.You should get away with re using your u bolts if you choose to do so and as for your shocks,i think you'll find that they are too short and dont even fit back on,maybe but there are cheap alternatives such as the vs wagon shocks and hilux shocks....have fun
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
If you do a 2 inch spring lift, you will also need to fit longer travel shocks, extended brake lines (they get close to not being long enough at full articulation) and fit extended bumpstops (around 2 inch) so that the shocks can not bottom out. Some shocks that work with the above bits are as follows:
Zuk Back Shocks: GABRIEL Part Number: 81147 - from Hiace / Hilux
Zuk Front Shocks: GABRIEL Part Number: 81340 - from VS Wagon rear
In relation to lifted springs, it would be a good idea to make sure you understand why you want/need them - they generally ride like CRAP, but can be improved. Have a look here: http://www.outerlimits4x4.com/phpBB2/ft ... 0-asc-.php
I hope that helps you out!
Cheers,
Pez
Zuk Back Shocks: GABRIEL Part Number: 81147 - from Hiace / Hilux
Zuk Front Shocks: GABRIEL Part Number: 81340 - from VS Wagon rear
In relation to lifted springs, it would be a good idea to make sure you understand why you want/need them - they generally ride like CRAP, but can be improved. Have a look here: http://www.outerlimits4x4.com/phpBB2/ft ... 0-asc-.php
I hope that helps you out!
Cheers,
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
As everyone has said, NO you can no run the standard shocks. Yes this will bolt back on, but they are at pretty much the full extended position. Get some new shocks, and get the right shocks too. Just because they fit does not mean they are any good. Correct lengths and valving is improtant to retaining your ride qualtiy (yes i know its a zook we are talking about) and handling.
Have a good look through the bible, and search through the site.
Layto....
Have a good look through the bible, and search through the site.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
yes....correct shocks for that vehicle.lay80n wrote:As everyone has said, NO you can no run the standard shocks. Yes this will bolt back on, but they are at pretty much the full extended position. Get some new shocks, and get the right shocks too. Just because they fit does not mean they are any good. Correct lengths and valving is improtant to retaining your ride qualtiy (yes i know its a zook we are talking about) and handling.
Have a good look through the bible, and search through the site.
Layto....
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
first off thanks for your guys help finally i get a good answer to that question and also was looking at running maxitrac leaf springs has any body else used or use these and has any body had any problems with them i.e been too stiff or soft and can i run any brand shock for the hiace and vs shocks.. or would i be able to pick up an aftermarket option for around about the same price?? thanks in advance...
Who is online
Users browsing this forum: No registered users and 2 guests