Page 1 of 1
Hilux front slipyolk extention
Posted: Fri Jun 20, 2008 4:06 am
by brighty
Have looked in the bible but unable to find anything there that helps.
Can someone point me in the right direction of how/where to get info on extending the slipyoke on the front drive shaft??
Cheers
Posted: Fri Jun 20, 2008 10:26 am
by LuxyBoy
Get a "custom" RHS one made or do it properly and go see a driveshaft shop and have a long slip made and balanced to suit.
Posted: Fri Jun 20, 2008 7:03 pm
by Sic Lux
http://www.locktup4x4.com.au/catalog/d3 ... ef8fe.aspx If you don't want to go a rhs one they'll get you sorted Rhs shafts are very strong had mine spinning on rocks on not a dama with it
Posted: Sat Jun 21, 2008 4:07 pm
by LuxyBoy
Note the RHS and lockedup ones maybe noisy as they are not balanced.
Posted: Sat Jun 21, 2008 9:51 pm
by beebee
LuxyBoy wrote:Note the RHS and lockedup ones maybe noisy as they are not balanced.
I would think the locktup ones would be fine. As long as they're aligned correctly when welded, they'd be fine. An SHS one on the other hand.....will be noisy as all hell! I know I've been using one for years! At least they don't fail and you can get plenty of slip out of them.