Page 1 of 1
D22 radio cover plate ?
Posted: Fri Jun 20, 2008 8:26 pm
by hollywood
gday guys this thing is doing my head in i need to get that cheezy silver cover off around my radio on the dash of my nissan d22 dualcab 4x4 so i can try to fit my uhf in the spare hole underneath the radio i can find only 2 screws to take out but thats it surely it cant be that hard does any know how its done please any one cheers steve.
Posted: Fri Jun 20, 2008 8:32 pm
by joshy
ive done it, was a while ago now tho. but from memory it was just the two screws that you undo from underneath and then u just pull it off. sorry dont have the nav here to double check
d22
Posted: Fri Jun 20, 2008 8:45 pm
by hollywood
tried that bit scared to pull to hard feels like it wants to break
Posted: Sat Jun 21, 2008 8:11 am
by joshy
dont just pull from 1 spot, work your way around
Posted: Sun Jun 22, 2008 12:51 pm
by tweak'e
take the whole front centre surround off.
a couple screws midway then unclip 2 clips right at the bottom. bit of a trick to finding them and poping them out. then pull bottom of the surround and it should come off.
then its 4 screw beside the radiowick will allow the radio and and plastic cubourd/cup holders to come out together.
hopefully your UHF has screw locations on the side of it so it can screw straight to the bracket.
Posted: Sun Jun 22, 2008 1:30 pm
by waxhead.
correct.
d22
Posted: Sun Jun 22, 2008 4:55 pm
by hollywood
cup holders ?.. its a D22 no cup holders in that surround not sure u guys on the same wave length u sure
Posted: Sun Jun 22, 2008 5:00 pm
by joshy
i think we were one of the few markets to not get the cup holders..the rest sounds rite
Posted: Sun Jun 22, 2008 5:05 pm
by tweak'e
cup holders where an optoin and fitted in the other din location.
i only have bottom model ute so it doesn't come with them :(
d22
Posted: Sun Jun 22, 2008 5:21 pm
by hollywood
so i take the screws out and just yank is that it