Outer Limits 4x4 Board

hey guys i have just purchased a gu patrol III plus, and upon picking it up from the dealer only recieved 1 key(excuse was we can only give what we got) anyway so i have one key, and no keyless remote, i rang nissan and gave them the vin and they said that it did come out with the remote, hence i purchased one from nissan but am waiting to get it programed then came across how to program it myself (under the nu bible) and tried but couldnt get it to work.
1st question could my patrol no have come out with keyless?
2nd is the method of reprograming the remote not relavent to my patrol

Nissan Patrol Reference Document
Page 50 of 112
KEYLESS REMOTE - REPROGRAMMING
Heres how it’s done:
1. Get in your vehicle and close all the doors.
2. Using your drivers lock button, lock all doors.
3. After doors are locked take your ignition key and insert it and remove it from ignition
switch in a slow fashion (six times in and out).
4. The hazard lights should flash and the doors will unlock.
5. Re-lock the doors using the drivers lock button.
6. Put the key in ignition switch and turn to the on position. Do not start the engine or
you will have to start again.
7. When in the on position hit the lock button on the remote, your hazard lights should
flash.

any info would be great thanx

Hi mate. You have the correct procedure but you need to swap step 5 & 6 around
Terry

ok ill try that but even after putting the key in and out 6 times couldnt get the hazard light to flash?? i tried putting it in and out at lots of different speeds and couldnt get any responce?

thanx mate ill try it again, but i couldnt get the hazard lights to flash initally? i tried doing the key at a range of speeds and couldnt get a result??

It needs to be 6 times in less than 10 sec

This may or maynot help, but if you go to the bottom of the thread or do a search i'm sure you'll find something, Cheers, Wayne

http://www.patrol4x4.com/forum/showthread.php?t=12585

cool thanx guys will try it again and see what i can do
cheers

Does your key reminder work?? If it has been disconnected it can cause problems trying to code remotes.
Terry

key reminder? sorry im not sure what that is, i just realised to that my door light is staying and that probably is why the key programing isnt working as the computer prob thinks a door is still open,, which brings me to another question how is the best way to check which door is playing up, i tried going around with all the doors closed and the car running and opening a door at a time and pushing the button in and out each door at a time but cant even get a blink out of the light it just is constantly on, which makes me think that it might be wiring possibly???

It will be the back door, it will need adjusting, I normally lift the door (as they drop over time), on there hinges to get the alignment spot on then adjust the strikers to suit,
you will find that the larger door is not closed properly and if you slam it, it will close and the light will go out.

hey mate yeah i tried stuffing round with the back door and couldnt get the light to budge at all tried slamming it and cant even get it to flicker, i didnt adjust the hinges though so i will try hopefully it will fix it..
thanx mate