Outer Limits 4x4 Board

Hi i was wondering if someone knows wat bolts are needed for a 2 inch body lift to a 1983 hilux dual cab. it is a RN46 i think. any information such as lengths or original or even the exact specs of the ones needed would be much appreciated

thanks everyone

2in longer than std Grade 8 or beter wen i re did my bolts I used a 7/16th(12mm) bolt but had to drill the washers and crush tube out a smalll bit to fit it. One way of doing it is pull the bolts from one side and go get 2 of each of them but 2in longer.

thanks sic lux, i was going to do that but i have this problem (lol) i work 5 days a week and i have no way of getting to the bolt place once i have pulled the bolts out of my only car hahah so i thought id try and see if anyone knew off the top of their head wat the lengths needed where, thanks tho ill have to do that hey lol.

140mm grade 8.8 high tensil, i used M10.... Hope this helps

thanks mate is this for a 1983 model hilux dual cab.

Yes it is