Outer Limits 4x4 Board

Is anybody interested in getting together to try for a bulk purchase from Rangie Spares on 4 door flares?
Is there anybody from Rangie Spares online. If so can they give an indication of quantity required & if they would be prepared to give us a special price.
Have been waiting on 80diesel4play to get his finished, but I need them now.
Steve
RANe rOVER

Anrew is a OL member but he is never realy online.

At the moment I think alot of us are waitin to see how 80Deisel4Play is goin with his 2 & 4" variety.....
But if RS (LRA) are willing to do a good group discount I would be interested.



80Deisel4Play - Cmon matey where stage of production are we at with the 4dr flares ? ? ?

Guys,

You may as well have a crack at a bulk deal - its all on the back burner till I get a decent glasser who understands what I want to do.

There will not be any 2" versions from me - I'm only going to make the biggest ones I can...

Be a while...

I would like a set, just too poor at the moment!!!

Trav

what are they worth normally?

As I'm keen for a set

Hi

RANUKI's doing 4 door's using 2 door flare's, this means modifying the doors but makes for cheaper replacement later. it also lifts the flare to the bonnet line/lip so they sit at same hight as front ones. He also levels out the inner guard that is visible when door open.

I believe it is about $350 for inital conversion front and rear (you supply flares). I'll get him to post photo's under "ranuki rocky rover".

Chris

Chris

Any more info on RANUKI's modifications?

Where is he located?

SteveC

SteveC wrote:Chris

Any more info on RANUKI's modifications?

Where is he located?

SteveC

Mexico

I would like some 4" for a 4 door though.

RANUKI is in Mooroolbark for those interested.

Flares aren't the only thing he does, PM him to find out what other off the wall ideas he has for rangies.


Chris

flares on rocky rover, these are r/spares 2 door jobs. Tyres are 31x10.5 on 15x10 rims.

Inner guards are lifted 1" to eliminate cutting tyre on up travel.

This is my rangie so finish is not that great as I will only smash it up anyways.

Don't spose you have a before pic?

RANUKI wrote:Inner guards are lifted 1" to eliminate cutting tyre on up travel.

This is my rangie so finish is not that great as I will only smash it up anyways.

I am thinking of doing to the same to my 4 door but i am worried about the doors no sealing properly

what do u fink?

The doors will seal fine as the door seal is to the inside of the door, you will find that it will leak less as the flat guard lessons the gap between the door and the shell. Hope that makes sense to ya..

I am doing on of Rangie Automotive's rigs in a week or so. I'll post some photos of the befor and after pics.

I am after a set of 4 door flares urgetly. I mounted the 33" MTR's over the weekend & they rub slightly, but they are still on, so I want to install a set of flares ASAP.
Does anyone have a second hand set or want to get together for a bulk buy from Rangie Spares, otherwise I will have to pay RRP, dam.
Steve

why not just do something temp. with rubber until you find a set 2nd hand.
Saying that, they hardly ever come up for sale 2nd hand.

some pics for those that PM me

After flares, This rangie is only running 2" springs and 2" body lift, has full uptravel and runs 35's with no rubbing.

doors b4

inner guards b4, refer to earlier post for after shot

good pics there... but do you have any of the rear door after you cut it ..
cheers
Ted

Race secrets - don't ask can't tell....

sounds like ur going to want a race .... r u up for it ...
when mine is done i will take u on ... lol...
Go the rangee

Cheers Ranuki.

Nice work.