Outer Limits 4x4 Board

Stop laughing and rolling your eyes!

The RH reversing bulb has gone in my brand spanking Pootrol (I'm not convinced it ever worked) so it's a simple bulb replacement. Hardly a technical operation and well within my skill level - I thought -until 'tried to get the plastic cover off and guess what -no screws! WTF

Car someone please help? How do i get in there?

..

there are a couple 10mm fasteners you get to from the access behind.

once you undo these you have to pull the lights hard enough to unclup them aswell. give it a good tug with the nuts undone, the clips will be new/tight

Jes

AFAIK, The RHS does not have a globe, not even sure they have the wiring there for it. Or SES Patrol is the same.

Dave

MKPatrolGuy wrote:AFAIK, The RHS does not have a globe, not even sure they have the wiring there for it. Or SES Patrol is the same.

Dave

well it f#'n ought to have one - I have 2 gateposts, Nissan!

If there nothing in there when I finally get in, I'll put one in, nice and bright.

no wiring on the drivers side for the reverse, only stop and indicator.

Need to bring the wiring from the other side over along with the tail light.