Outer Limits 4x4 Board

I have just purchased a PWR air to water intercooler kit barrel type and i am planning on putting it on my gu td42 with dts turbo system. Has anyone done this if so what other parts were needed induction bends silicon hose ect ect pics would be great
Cheers

Has anyone got any info that may be of help on the fitment

surley if you have the kit it on you it should make it easy to work out where and what bends and brakets are required

Im about to mount a PWR 6" x 10 " water to air in the next few weeks or so ill post some pics of the bracket im making, got to get some things laser cut and order some aluminium bends and ill start hooking in!!!

drew4130 wrote:Im about to mount a PWR 6" x 10 " water to air in the next few weeks or so ill post some pics of the bracket im making, got to get some things laser cut and order some aluminium bends and ill start hooking in!!!

I too would be very interested in this, seen as though yours is a GU also. Thinking of putting an intercooler on mine and the extra ideas and pictures would be great.

Will be keeping an eye on this tread

My mate Trav has one on his gq there are a few pics here:
http://www.patrol4x4.com/forum/showthre ... 440&page=2

Rob

got it all plumed up and working today needs a little bit of a tidy up and a dyno tune but verry happy with it








[/img]

did it make a nice differance mate, notice much power increase or general better feel about the truck

seems to sound a fair bit different and goes a bit harder i think a dyno tne will help it has never had one i live in weipa so i have to drive down to cairns to get one but should bee soon

thanks mate, can you pm me or just post up were abouts you got the kit from and how much!? cheers!

It is a pwr kit here is a link

http://www.pwr.com.au/coolers_ltoa.html

hey kond. what sort of flares are those?

i think saw your truck while i was in weipa a couple of months ago
keep up the good work

hey Tomo_89. i bought them from BOAB 4x4 in brisbane about a year ago

hey kond, probably a stupid question, but i couldn't see an air cleaner box under the bonnet in those photo's, do you have one and if so whereis it and what type is it??? can you post a pic??

Thanks

it has standaerd filter in the pics, just behind the left hand headlight.

i hope this isnt to rude but how much was the kit?

About $1300 from memory

Rotated the barrel around 90 degrees today to remove any air locks that might have been in there just used some 90 degree heater hose bends of a car wreck here are some pics