Page 1 of 1
centre bearing
Posted: Fri Jun 27, 2008 1:23 am
by highwaychook
when fitting a new centre bearing should I smear the seals and contact area with grease or leave them bone dry? Also the centre bearing itself is sealed so it shouldn't be greased at all hey fellas???
Posted: Fri Jun 27, 2008 6:06 pm
by brad 93hilux
yes definately smear the sealing faces on the seal with grease..
The bearing is sealed, would not worry bout greasing it.
Brad
Posted: Fri Jun 27, 2008 9:05 pm
by highwaychook
Thanks Brad thats what I thought mate.
Posted: Sat Jun 28, 2008 1:15 am
by Sic Lux
Wouldn't use grease use a anti sizie silver stuff loctite make it.
Posted: Sat Jun 28, 2008 11:52 am
by brad 93hilux
Sic Lux wrote:Wouldn't use grease use a anti sizie silver stuff loctite make it.
Y's that?
Just curious, as i would think the rubber on the sealing face would be better suited to grease not anti-sieze... Not sure as some products make the seals go brittle...
Brad