Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

slipping clutch

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 35
Joined: Mon Mar 31, 2008 9:40 pm
Location: Perth

slipping clutch

Post by speedracer006 »

went for a quick fourby today after work, and after 5 minutes in the sand, the clutch started to slip wickedly. i would have it in 4wd low, go to take off, and would just go nowhere (the wheels wernt even spinning!!). i let it cool for a bit then drove her home. seems that when it cools and gets put back in 2wd, it doesnt seem to slip. However i have an invoice from the guy i bought the car off saying that it had a full new clutch kit put in it on the 31st of janurary! has anyone else had this problem? its definately the clutch but it just seems odd since this clutch has only been in for 4 months!
cheeers
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Post by ScrawnC »

Make sure there is freeplay at the clutch fork on the gearbox. There is an adjustment nut at the end of the cable.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

As scrawnC said, chech your adjustment, as the new clutch beds in it will require a few adjustments. How much free-play is in your pedal, where is the take-up point?

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 82
Joined: Sat Oct 13, 2007 8:20 pm
Location: brizzy

clutch

Post by sic_zook »

thay probably didnt machine the flywheel n once u slip a clutch bad it fucked anyway the presher plate looses spring tention
User avatar
Eff
Posts: 146
Joined: Sat Jan 01, 2005 11:14 pm
Location: Melbourne

Post by Eff »

My clutch shit itself all of a sudden. Found out that the gearbox seal died and gearbox oil leaked into the clutch area.
Post Reply

Who is online

Users browsing this forum: No registered users and 72 guests