Page 1 of 1
TD42t turbocharger specs.
Posted: Thu Jul 03, 2008 6:22 am
by Devious
Heyyas. I have been looking and just cant find the answers I am after.
I would like to know what A/R the exhaust housing is on a standard TD42 turbocharger, also, what mounting flange size they are t2, t3, t4 etc.
Thanks in advance.
Posted: Tue Jul 08, 2008 5:04 pm
by Dzltec
Dont know the a/r, but its a t3 flange, made by Hitachi.
Andy
Posted: Tue Jul 08, 2008 8:21 pm
by Devious
Thanks for that.
I am trying to get a turbo that closely matches the stock turbo on the cheap. EG, Skyline R32/33 turbo. I have a turbo of an R32 GTS-t witting here that has been recoed but I am not sure if the exhaust housing will be too small for the 4.2
Posted: Tue Jul 08, 2008 10:38 pm
by monkeycritter
As best I'm aware, the closest is a T3. Could be wrong, but pretty sure.
Posted: Wed Jul 09, 2008 6:31 am
by Devious
That is my other option, stick a bigger turbo on my wifes car and steal her To3. Although, this turbo of the R32 has a t3 flange where it bolts up to the manifold.
I wonder how far off an RB30 or even RB25det exhaust manifold is from fitting the TD42?