Outer Limits 4x4 Board

hi, i am getting a custom front bar made and am after some ideas. can any of u please post a pic or two of ur front bars? thanks in advance!

mine

i like those cheezy bars, a mate has one on his GQ. i suppose any tube bar pics regardless of the vehicle would help...

been done... this is the most recent thread.

http://www.outerlimits4x4.com/ftopic122 ... light=bars

Here is one that Sandy Rut knocked up for me. Based on the Fat bar, but made to be a little lighter.



IT has 3mm plate welded over the support brace (on top of the bar - triangle sections). These add strength and give you something to stand on to opperate when you are a short arse like me!

mine custom built to take the PTO

dwaynes wrote:mine custom built to take the PTO

Who built this bar? Do you have some more pics showing the PTO?

here is the only one i have with the PTO in it



will get some more when i get back to vic later in the week.


oh it was built by centravic performance 4x4

mine is a tjm that i modified


Cheers Den

This is a tube bar designed and built by Dave at ACF Mt Evelyn Vic, on a production class car. It's been tested at Engel rnd 2 Cooma and it's all good.
The hoop over the winch can be totally customised to the customers requirements incuding 'wings' to protect the indicators...........
PM and I'll pass on his contact number............

heres a pic of my new custom front bar

Man that's hot who thought out your design Do they also do other makes and models or is it a one angle grinder fits all sort of thing.

My attempt a few years ago

I don't have a GQ, I have an MQ but...

Here is a few pics of the front bar on it, also for PTO winch. A lot of these pics of bars posted so far look very similar so mine is just to give you some ideas on something a little different.





I am considering putting front blinkers in the bar, triangular section. Thinking grate it over and incorporate some LED blinkers into it. May also add a second fairlead down lower so I can run the PTO either way. Bar was built 6 months after winch cage so that is why they don't match 100%.

mate that MQ looks very well setup. i like what u have done with the barwork, looks tough as. all looks removable too? what are some of these bars worth to get made?

cost me about 200 dollars in material and about 5 hours of stuffing around.

this is one of mine ..............

this is one of mine ..............

Mine...haven't used photobucket before so will apoilogise first in case it stuffs up!!

[/ihttp://i319.photobucket.com/albums/mm460/twodiffs/IMG_2487.jpgmg]

http://i319.photobucket.com/albums/mm46 ... G_2487.jpg

Got the link on but how are you guys posting your pics on here???

Thanks for the tips guys!

thats a nice and practical lookin bar.

Thanks, this is photo of bar on my first GQ, it was strong but heavy and too big so went for a lighter but still strong design second time around.
Had a snatch strop break and come back at me one day and it broke my spotlights so now I put mesh on the bars.

This is a tube bar designed and built by Dave at ACF Mt Evelyn Vic, on a production class car. It's been tested at Engel rnd 2 Cooma and it's all good.
The hoop over the winch can be totally customised to the customers requirements incuding 'wings' to protect the indicators...........
PM and I'll pass on his contact number............

I heard that ACF closed down, since being kicked out of Adrians "Rangie Automotive" due to a lot of unhappy, patient customers
That bar looks avarage anyway alot better bars on the market. Ontrack make a strong practical "winch challenge" bar

Dwanye your bar looks greats and offers the best of both worlds

smashedcrab wrote:

This is a tube bar designed and built by Dave at ACF Mt Evelyn Vic, on a production class car. It's been tested at Engel rnd 2 Cooma and it's all good.
The hoop over the winch can be totally customised to the customers requirements incuding 'wings' to protect the indicators...........
PM and I'll pass on his contact number............

I heard that ACF closed down, since being kicked out of Adrians "Rangie Automotive" due to a lot of unhappy, patient customers
That bar looks avarage anyway alot better bars on the market. Ontrack make a strong practical "winch challenge" bar

Dwanye your bar looks greats and offers the best of both worlds

i think that the bar looks great, im so sick of every single person with a FAT or CHEEZY front bar, i would much prefer this over something every other person has

any way this is my bar its by PATROLDOCTA, tuff as Sh!t, and designed to be able to take a hit without capsizing

here are a few pics of our bars

http://s150.photobucket.com/albums/s103 ... _06089.jpg

http://s150.photobucket.com/albums/s103 ... 06_150.jpg

http://s150.photobucket.com/albums/s103 ... sGQ003.jpg

http://s150.photobucket.com/albums/s103 ... sGQ001.jpg

http://s150.photobucket.com/albums/s103 ... C00035.jpg

Can some of you guys please post some prices??? I am northside of brissie. Really keen on some of these designs, just really want a quote or two.

Thanks

[quote="whythef@#!not"]heres a pic of my new custom front bar



this sort of bar would probably set you back about $2400, i am located north side iswell mate, pm us if you would like one made up, just give me about 3-4 weeks to make it up