Page 1 of 1

MQ steering Box questions

Posted: Sun Feb 29, 2004 7:27 pm
by Screwy
hey guys,

1. Are the ratios in MQ steering boxes different in a powersteer box compared to a non-powersteer box?

also

2. is it possible to run a power steering box with the hoe outlets plugged and powersteer fluid in it but no pump?

cheers,

Screwy

Posted: Sun Feb 29, 2004 8:24 pm
by bazzle
Yes to both BUT heavy as hell.

bazzle

power steer

Posted: Tue Mar 02, 2004 9:00 pm
by DR Frankenstine
hi screwy
Yes the ratios are different and you thought the steering was heavy before.
You can use just about any pump , I had a pump off an old falcon for ages when i had the 351v8 on board. worked fine.

Posted: Tue Mar 02, 2004 10:18 pm
by MKPatrolGuy
Saginaw pumps work really well, halved the steering effort in my MK

Posted: Wed Mar 03, 2004 7:39 am
by Screwy
Nah, i realise that all the pumps can be used if ya mount em right. Thats not the question.
My new steering setup from Offroad industries that ive fitted was designed and drilled for a power steering box.

I have lost my full lock by about 20mm either side of the bump stops which is about 4 inches on each wheels movement. ( i cant get around a coldasack in one go in the shorty MQ!!!! ).

If the ratios are definatly diferent then that would be the proplem for sure.
My V8 is going in in a little over a month, and im adapting the power steering pump to it, thats all cool.

wat im saying is that i dont want to wait a month, driving around with such a crapy turning circle before putting the v8 in. So i would like to know if i can put the power steering box on now, plug the pipes and fill with oil and drive it around with out the pump for a month until the V8 goes in with the pump on the v8, i dont want to but it on the diesel for a month...???

And will it damage the box?

thanks for ur help so far guys!

Screwy

Posted: Wed Mar 03, 2004 9:11 pm
by bazzle
READ post no2 above

Bazzle :cool:

Posted: Wed Mar 03, 2004 9:16 pm
by Screwy
its not gonna damage it? Ive been told that the little valves inside might get stuffed?

Screwy

Posted: Wed Mar 03, 2004 9:39 pm
by MKPatrolGuy
I wouldn't try to drive it without the PS hooked up, I drove down my street without the PS hooked up after the engine swap and I could barely turn the wheel.

Posted: Thu Mar 04, 2004 7:38 am
by Screwy
well, ive got to buy the PS box anyways so IF it wont damage it ill fit it and c how bad it is, though i only have to put up with it for a month. I think i might rather a heavy wheel than one that barely has a turning circle........
Wat u think?

Screwy

Posted: Thu Mar 04, 2004 5:21 pm
by MKPatrolGuy
Screwy_ScrewBall wrote:well, ive got to buy the PS box anyways so IF it wont damage it ill fit it and c how bad it is, though i only have to put up with it for a month. I think i might rather a heavy wheel than one that barely has a turning circle........
Wat u think?

Screwy


You wont be able to drive it safely on the road with a non connected PS box, I needed 2 hands pulling down on the wheel to barely get it to turn.

My advice...Don't do it.

Posted: Thu Mar 04, 2004 7:22 pm
by beefie
stick with the 3 point turn till u get the v8 in as it feels like you are going to rip the column out of the dash just rolling out of the driveway

Posted: Thu Mar 04, 2004 9:20 pm
by Screwy
So its that heavy hey? fair enough ill leave it a month then.
Thanks Guys!!!

Screwy

ps

Posted: Thu Mar 04, 2004 9:56 pm
by DR Frankenstine
YAY

Posted: Thu Mar 04, 2004 10:01 pm
by Screwy
Now i just need a powersteering box........

box

Posted: Thu Mar 04, 2004 10:11 pm
by DR Frankenstine
Screwy_ScrewBall wrote:Now i just need a powersteering box........
oh what i thought you had one (how dumb am i ) i'll see what i can do! You want a pump to?

Posted: Thu Mar 04, 2004 10:13 pm
by Screwy
Nah i got the pump and i can get the box, but not at the price i want it at.

Screwy

power steer box

Posted: Sat Mar 06, 2004 2:03 pm
by DR Frankenstine
I just sold pump and box for $500 how much do they want

Posted: Sat Mar 06, 2004 5:56 pm
by Screwy
Not sure about the pump but they want $150 for the box.....

Screwy

Posted: Sat Mar 06, 2004 7:37 pm
by DR Frankenstine
Screwy_ScrewBall wrote:Not sure about the pump but they want $150 for the box.....

Screwy
cheap!

Posted: Mon Mar 08, 2004 10:13 pm
by Screwy
so i should take it at that price then?

cheers,

Screwy