Page 1 of 1
another locker option
Posted: Mon Jul 07, 2008 2:20 pm
by jav
MQ front axle's have the sane spline as a scat axle's. Maybe you could pull axle tubs out and swap the whole center. No problem getting lockers them. Take pics of both diffs and post them up tuesday.
Anyone know how to get the axle tubes out of the center
Posted: Mon Jul 07, 2008 7:57 pm
by RockyF75
I take it you have a pair of each?
Their the same diameter? I would have thought the MQ's would be bigger. And would the MQ center physically fit in a scat housing?
And the next logical question, for me at least, are scat axles the same as Rocky's
Posted: Tue Jul 08, 2008 1:06 am
by jav
Hava a pair of each.
I don't think the MQ center will fit in the scat housing. You would have to use the MQ center and it's cast housing. axle tubes are bigger on the mq, but a sleeve will fix that.
rocky should be the same as scat except the ifs front end.
Posted: Tue Jul 08, 2008 8:54 am
by lay80n
jav wrote:Hava a pair of each.
I don't think the MQ center will fit in the scat housing. You would have to use the MQ center and it's cast housing. axle tubes are bigger on the mq, but a sleeve will fix that.
rocky should be the same as scat except the ifs front end.
Pretty sure that ROCKYF75 will have a solid front end in his rocky.
Layto....