Outer Limits 4x4 Board

hey all i have a BES turbo timer in a 105 series cruiser and it has stopped working and i didnt install it, it was allready in the car when i bought it does anybody know if it is run through any fuses in the fuse box or anything there is a box the turbo timer run into i was just wondering if anyone knows if there is a fuse in there or could it be any other problem?

regards scott

they piggy back the main ingniion loom, to install you pull out the plug from the ingnition and the timer plugs in and allows the loom to plug into the timer, there is the control panel that you can see with the buttons and there should b a small black box behind the dash, just follow the wiring, if mmory serves me correctly there is a fuse in there, also check the connections on the loom plug.

thanks tiny ill check it out tomorrow there is a black box under there

They run a seperate ground wire usualy....have ou been playing in the water or doing wiring/dash removing lately??

nope not really the window leaks a little it runs down the kick pannel tho