Outer Limits 4x4 Board

Yep thats right, currently getting built at Rustys Fab Worx and will be completed by Christmas.
Specs:
Suzuki Sierra LWB
Coil overs with hydro bump stops
5.7ltr LS1 Clubsport Motor
Turbo 700 Auto
2 speed Atlas transfer
Unimog diffs 404 modified front diff centre.
Dual disc calipers on front
Single disc caliper on rear
Front Buckets
Rear kids seat buckets x 3
6 point roll cage
17"x8" alloys with max positive offset possible
37"x12" Crawlers
Staun internal bead locks
A-Frame rear
5 link front
Hydro asist steer

Will show some progress pics soon.

Can't wait

holy crap! whats the budget on this build!?! =)

Hate to think, I'm just going with the flow, I might do some figures at the end

Sounds like a TTC09 truck!

Pics!
Doing a build up on members section here, or in this section?

Maybe an old question but what happened to the 80?




Cant wait to see the zook.

Sounds like a sweet build but 37's seem small for the hardware involved. BTW there are two sets of 37X12.5x17" BFG krawlers for sale in the classifieds if you're looking for spares.

v840 wrote:Maybe an old question but what happened to the 80?




Cant wait to see the zook.

80 was rolled i think?
Sounds nice, make sure you post up plenty of pics of Garths work

Layto....

please keep it full body

Beleive it when I see it, Barlow hasnt finished a project in....FOREVER!!!!!

Spike_Sierra wrote:please keep it full body

I agree!!!! God damn it sounds like one sweet zook your planning on making... All hail you!!!!

Kool Shane !!!
Welcome to the DARK side !!!!

as for the 80 , if ppl looked at other sections ..ie..Classifieds... all components from the 80 were up for sale recently !!!

get it up there wrote:

Spike_Sierra wrote:please keep it full body

I agree!!!! God damn it sounds like one sweet zook your planning on making... All hail you!!!!

By how much are you going to increase the width of the body and what chassis are you using. 5.7lt + Sierra Chassis = pretzel

This wouldnt be what is happening to your old one Garth?

Layto....

Its about time this thing saw the light of day rather than looking cool in garths carports and sheds.......BRING IT ON

moose wrote:Kool Shane !!!
Welcome to the DARK side !!!!

as for the 80 , if ppl looked at other sections ..ie..Classifieds... all components from the 80 were up for sale recently !!!

Pfft. Other sections.
All the cool kids know the action is in the zook forum.

[quote="v840"]Maybe an old question but what happened to the 80?/quote]
The 80 project was a bit like Garths Suzuki Project (got rolling but never off the ground) ideas changed etc and well this is really happening, for once I can see myself 4wheelin again

Rick, good on ya, but don't blame ya thinking that way

It is a full chassis and Suk body, only tube will be in the cage and suspension hoops.

Only going 37" tyres, its just going to be an all round rig (just gonna have a lot of fun driving it)

Garths doing the work, I'll help and hinder where I can.

Will be approx 16" wider (8" bush wacker flares will take care of this)

It is a LWB, so what ever that is, we did discuss last night the front may be pushed out forward more.
The firewall is being moved so the back of the motor comes in line with the windscreen.

Using the sierra chassis, not convinced myself will be strong enough but Garth seems to have it under control.

Certainly is Garths old Suzuki

Always did have had a soft spot for the suzuki myself, but just had to be a little different than the rest, only way for that to happen was to give it a big heart

if this thing gets on the road legally then i might have to look at puttin a rover V8 into mine.


Cant wait to see it.

built4thrashing wrote:if this thing gets on the road legally then i might have to look at puttin a rover V8 into mine.


Cant wait to see it.

I have a couple of 4.4leylands for sale posted under tyre and wheels, not agreat thread to sell motors but I sold my Bajaclaws as well