Outer Limits 4x4 Board

I would like to add keyless entry to my GQ. Ay one had experience with adding in a eBay Kit to the factory central lockng?

Lockee, I removed the wires into my doors, pink ones, and started fresh. The factory setup is crap. There is no solinoid/actuator/motor in the drivers' door. It is merely a switch that is activated by the key to lock the other doors. So it must be locked/unlocked via the key every time. I have always used the crappy $20 central locking kits from Strathfield without problems. If one gives up, I buy a new kit and have spares for next time. Not that I have problems either. You will need two kits to get a 5th actuator for the rear door. Then I wire it all up to an aftermarket alarm. Works fine and easy.

I did the same as BowtieGQ and i have not had any problems in 3 years, i put the control box behind the battery.

being a ti it probly already has solinoids for all the doors bar the drivers door , so you just need one actuator for it , then you could hook up your keyless entry to it only and control all the other doors


easier and less wiring to do

True. But the Nissan ones are prone to breaking at the arm that pivots. I also changed it all so that I knew it was compatable with the alarm I was instaling at the same time.