Page 1 of 1
ls1 rear main seal replacement info needed
Posted: Tue Jul 15, 2008 1:37 am
by cooter
just wondering if ay1 has a manual i can have a look at mate of mine is replacing his this week and needs to know a bit about the job before he tackles it and also need tensions for flex plate
Posted: Tue Jul 15, 2008 9:41 am
by highwaychook
I have a thread about this in Toyo tech.
Posted: Tue Jul 15, 2008 11:03 am
by cooter
im after info on the chev alloy 350 not sure whether it is a 1 piece seal or not
Posted: Tue Jul 15, 2008 5:59 pm
by InSanE
I am a mech at a Holden dealer mate and the the flywheel/flexplate bolts are tentioned at 100nm and they are consumable bolts and must be replaces with new ones, and the pressure plate bolt torque is 70nm just make sure you locktite the flywheel/flexplate bolts and the clutch plate bolts as I have seen a few come loose in my time.
Also yea it is a one peice seal but they have a plate on the rear of the motor that can leak Its not very common but wouldnt hurt to change that while your there its upto you mate.
Posted: Wed Jul 16, 2008 8:09 pm
by BOGAN V8
i have a manual here that covers that if ya want i can scan a few pages and email it to ya...