Outer Limits 4x4 Board

i have just put a 1hd fte out of a 2003 78 series ute does anyone know anybody that can do a loom that will make the wiring easier thanks

Good luck if you find someone. The guy that did mine and lurks on here did it all himself with questions on here and various wiring diagrams. He never got the tacho workign and I can't find anyone who can tackle it successfully up here for reasonable money. The guys that know are total Care in Sydney but they generally won't give out any info. If you took it to them they'd probably wire it for you and they'd probably give out the name of the auto leccie they use (I can't remember his name) but you would have to take it to him. He quoted me somethign like $300 to get the tacho working and he has to do it per vehicle he apparently cannot sell me a plug and play loom. Even then they don't work totally accurately. Do a few searches and you will come across the questions Mark asked on here which may help. His name on here is mud4b I think from memory. Everything else seems to work fine and from memory reading his posts was not that difficult just a few little hickups that were fairly quickly sorted. From what I understood there are not that many wires from the ute loom and ECU that were actually that necessary.