Outer Limits 4x4 Board

hey guys, i have a 1993 hilux with 3" lifted springs and 2" shackles.
I reciently bought the trailgear highsteer kit with the group buy on here.

Basically i have the arms on and the ifs box into position but cant work out exactly where to position the mounting kit and ifs box..

Any chance of maybe getting a pic of the way one of you guys have set it up?

Also do you have to use a steering shaft extension?

Any advice would be much appriciated.

Cheers
Brad

put the steering box as far foward as u can.

as far forward as you can and yes you will have to muck about with the steering shaft, I extended mine (cut and spliced)

Chris

Yeah get it as far foward as you can have a look at hilux builds in members threads may give you some ideas. for the steering shaft on mine it was cut and sleeved with some pipe .

Sic Lux wrote:Yeah get it as far foward as you can have a look at hilux builds in members threads may give you some ideas. for the steering shaft on mine it was cut and sleeved with some pipe .

Sounds like a good idea..

Any idea of weather this is engineerable?

Cheers, thanks for the help.
Brad

Not if you cut and reweld ya steering shaft. I have heard that you can use the shaft from an IFS hilux. Otherwise I can't see it being a problem. Transport may not like it though.

Yeah talk to a engineer in your area it's him signing off on it at the end of the day. One thing i wouldn't mind looking at is using a 80 series box as the arm swings in front of the box this way you could use the shaft at standard lenght or even shorten it down and have it re splined which i think they'd like more than welding the shaft.

Cheers guys, appreciate the help..

Brad