Page 1 of 1
Which DIFFS FOR RANGIE
Posted: Mon Jul 21, 2008 7:55 pm
by lukes4x4
I am not rangie smart so i hope some of you can tell me what you guys have installed diff wise to upgrade these tiny things. What diffs are people running. thanks.....
Posted: Mon Jul 21, 2008 8:11 pm
by tna racing
Gq front with 4.1 and 80 series rear with 4.11.
or longfeilds,maxi drives or macramanas (sp)
or
www.rovertracks.com
Posted: Mon Jul 21, 2008 8:22 pm
by jbell
The rover tracks stuff is good, replace's rover centre with hilux
stuff you get the axles too
Contact the boys at locktup4x4.com.au for pricing
Jeff
Posted: Mon Jul 21, 2008 9:10 pm
by HSV Rangie
quuite a few options.
Peg diff and fit jacmac/maxidrive axles.
longfield rover tracks CVs.
Nissan front difwith 80 seies rear diff.
Toy 8 inch cntres ino rover housings with jacmac ales.
Michael.
Posted: Mon Jul 21, 2008 9:27 pm
by zuffen
I have GQ front and rear with GQ transmission and transfer.
Posted: Tue Jul 22, 2008 7:49 am
by Cranky
i have front and rear maxidrive diffs for sale. they are a very good option.
pete
Posted: Tue Jul 22, 2008 7:18 pm
by awright
The MD Stuff is great!
I have front and rears in my Disco and the Rangie before that!
They bolt straight in without any mods and have front and rear lockers built in.
Added to that you can lock em in anytime without having to worry about if you have turned on the compressor or not before hand.
Get a price on a pair of lockers from ARB + the compressor + GQ or toyota diffs + the mods works required to get them in and perhaps the engineering costs if you want to keep it all strictly legit ....
...and then ask Cranky how much he wants for his MDs! If it is less than $5k you would have to be in front!
Posted: Tue Jul 22, 2008 8:06 pm
by ... rick
60 series f&r.
Posted: Tue Jul 22, 2008 8:50 pm
by uninformed
arn't 60's narrower than rangies?
Serg
Posted: Tue Jul 22, 2008 9:41 pm
by ... rick
Yep. I am running 1.5" spacers all round. Probably should have gone 2" but you get that.
Rick.
Posted: Tue Jul 22, 2008 10:10 pm
by uninformed
i think the 60 series is a great diff, but i personaly would not run wheel spacers.
id prefer the hub to be the widest point and have the least amount of offset in the wheel.
Serg
Posted: Tue Jul 22, 2008 11:00 pm
by ALRacing
I'm running a 80 series front and v6 hilux rear
Both in Disco axle housings with a rovertracks toy conversion 30 spline
Pretty easy to do and fairly bombproof