Outer Limits 4x4 Board

Putting my interior back together and hit a snag

Someone helping me took the seatbelt assemblies off and can't remember how they were setup I can't remember either, not something you look at all the time

I've got it almost done just can't see where the end of the belt bolts down (not the roller end the other end)

There's a few places it "could" go but none seem quite right

It's on an 84 LWB BTW........ where does it go

One at a time now

Seriously could use some advice on this one

Anyone got pics of interior etc where the belt setup might incidentally be in the shot

Anyone

1ltr I guess or a 1.3. ??

PM Christover, He has a 84 lwb i think. Also I didn't think 84's had rollers I thought they had only non retractable.

cheers

nic

Yours wouldnt have had retractable belts from factory AFAIK.

The retractable bit should be down the bottom, behind the seat. On Sierras that have these belts stock there is a panel about 150mmx100mm that bolts onto the "wall" next to the seat.

The other end of the belt should bolt to the targa bar at about shoulder height.

Show us some pics of your rig to give us an idea of what's going on.