Page 1 of 1
Transfer Gears!
Posted: Sun Jul 27, 2008 6:50 pm
by spzook
Will 1.3L gears fit into a 1L transfer or not?
cheers.
Posted: Sun Jul 27, 2008 7:38 pm
by ajsr
i dont belive they will
and why would you want the anyway
isnt the 1lt a better ratio offroad anyway???
a mate runs a 1lt in his 1300 for this reason
Posted: Sun Jul 27, 2008 8:07 pm
by spzook
found some cheap rockcrawlers for a 1.3 but i have a 1.0.
just wanted to know if they fit.
cheers.
Posted: Sun Jul 27, 2008 8:11 pm
by jonno_racing
depends
if it has a 4wd light switch.. yes
if not NO..
simple!
Posted: Sun Jul 27, 2008 8:25 pm
by Gwagensteve
X2.
There can be some more case grinding to fit the gears but it's no biggy.
Steve.
Posted: Mon Jul 28, 2008 4:12 pm
by Mr Biggels
I thought 1lt transfer cases were wirth more than 1.3ltr jobbies.
Just a thought, but you could buy a 1.3 unit and sell your 1ltr for a proffit.
$$$ in the pocket.
Posted: Mon Jul 28, 2008 4:14 pm
by 1_tuff_sierra
a 1l tranfer fits the 1.3 gear in it but u got to have a 1l tranfer with a switch..... if it dose not have a switch they are difrent to the 1.3.....
Posted: Mon Jul 28, 2008 4:29 pm
by spzook
what does this elusive switch look like and where should i be looking for it?