Outer Limits 4x4 Board

Hey guys!

I'm posting this up for a mate who has a problem with his Rangie.

It cranks over fine but doesn't start. Spark is there and fuel seems to be there too?!

The problem occoured after welding on the chassis.... the battery wasn't disconnected. Do you guys reckon the computer for the EFI could be fried?

Another thing is, there is fuel leaking from a injector that sits in the intake manifold (cold start??). Could that be a problem too?

I'm a diesel man so I'm not too sure what could be wrong.

Maybe there is somebody in the Sutherland area (Sydney) who has a 3.5 Rangie to try out their computer.

Your help is greatly appreciated!

hey buddy, what year rangie is it? i have a complete 1988 efi computer wiring harness and computer setup still in spare car

Hey mate!

That is a good question. I have to find that out tomorrow!
I will post it up when I know further details.
Thanks

Ok guys, got it going today.

It was just "flooded" as it appears.

I took out all the spark plugs (filthy) and cleaned them plus cranked the engine over without the fuel pump running to dry it out.

Started straight away after that.

Cheers

A.J.