Outer Limits 4x4 Board

I would like to know what diff ratios are available to the 80 series diffs.

I searched and all the threads are for a particular tyre size or motor, I would like a list of all available sizes, factory and aftermarket, so I can work out what I want for a good bush ratio.

Neale

Factory is 4.10 only. There were no other ratios at all in the 80 series.

Aftermarket should be available in 3.70, 4.56, 4.88, 5.29.

Sixty's Guy wrote:Aftermarket should be available in 3.70, 4.56, 4.88, 5.29.

4.3 also available, possibly a 5.9(?), however there really is no reason to change them from 4.1 - it is a good compromise ratio providing good strength, cheap replacement, and decent crawl. 80's engines all have excellent low rpm torque characteristics (possibly excepting the 1HD-FT) and aftermarket low range gears are available if you have huge tyres (up to 36" is quite acceptable with the stock ratios).