Page 1 of 1
Spare wheel hi lift mount
Posted: Wed Jul 30, 2008 9:18 pm
by lkgrainger
Hi guys,
I have Mav (GQ) I want to put the high lift onto the spare wheel.
I would like to make one myself does anyone have plans or pics of any?
Thanks Leigh
Posted: Wed Jul 30, 2008 10:02 pm
by Jeeps
Here's the only pic i have of mine which i have sold. It retails for $130.
cheers
Posted: Thu Jul 31, 2008 1:38 pm
by Skegbudley
I wouldnt bother making one. Tigerz11 sells them for $60.
Posted: Thu Jul 31, 2008 6:46 pm
by lkgrainger
Who? Where? Sign me up!
Posted: Thu Jul 31, 2008 8:28 pm
by Skegbudley
PM sent
Posted: Fri Aug 01, 2008 7:29 pm
by Patroler
wondered about these, anyone know of any issues due to the weight of a highlift and wheel on the door? they're both pretty heavy, i'm in the process of making an autotune hf bracket that will mount between the wheel and the door - gq (don't want the one that goes at the back of the spare as you have to unbolt it to get to the spare) but an autotune is really light compared to a highlift.
Posted: Sat Aug 02, 2008 10:00 pm
by Jeeps
Patroler wrote:wondered about these, anyone know of any issues due to the weight of a highlift and wheel on the door? they're both pretty heavy, i'm in the process of making an autotune hf bracket that will mount between the wheel and the door - gq (don't want the one that goes at the back of the spare as you have to unbolt it to get to the spare) but an autotune is really light compared to a highlift.
That's why i sold mine, it was too heavy for the door. I think the bloke i sold it to had an aftermarket ear bar with a swingaway so there wasn't an issue. I mount my high lift to the jeep's factory rollbar.
Cheers