Outer Limits 4x4 Board

this is a kit i am thinkin of gettin. what else do people reckomend i get along with it to finish the job properly. Also i was thinkin to go the efs extreme shock rather than the pro comps..

https://www.suspensionstuff.com.au/shop ... uqb4357qn3

thanks for the help.

i would be wary buying a suspension kit over 2 inches for your 4x4.
nsw police are now targeting 4x4s with more than 2 inches of lift,whether it be through a body lift or suspension.it is only allowed 2 inches total,over standard height.
these laws are soon to be released throughout australia,in an attempt to get dangerous lifts of the road.

give steve hobbs a call he runs the 4wd shop on ebay really nice guy and good advice. here is hes number 0417486637 if troy answers ask to speak to steve and tell him monster steve sent you he will take cear of you

4x4 guy wrote:i would be wary buying a suspension kit over 2 inches for your 4x4.
nsw police are now targeting 4x4s with more than 2 inches of lift,whether it be through a body lift or suspension.it is only allowed 2 inches total,over standard height.
these laws are soon to be released throughout australia,in an attempt to get dangerous lifts of the road.

i'm in vic mate and last i have heard down here we r allowed 6 inch in total 150mm over standard. my lux had 4 inch and 33 tyres was never and issue to the cops..

But yeah cops r targetin 4bies more.

i was lookin into 4 inch try pass it off as a 3 inch and run 35s 36s. lets hope they dont wipe out a ruler. lol

steveoo wrote:give steve hobbs a call he runs the 4wd shop on ebay really nice guy and good advice. here is hes number 0417486637 if troy answers ask to speak to steve and tell him monster steve sent you he will take cear of you

cool cheers mate

4wd_Haggis wrote:this is a kit i am thinkin of gettin. what else do people reckomend i get along with it to finish the job properly. Also i was thinkin to go the efs extreme shock rather than the pro comps..

https://www.suspensionstuff.com.au/shop ... uqb4357qn3

thanks for the help.

hey bud if your looking for 4'' hight and trying to pass it off as a 3'' go the 3'' flexy set up shane has on that site its my truck in the pics and it sits 160mm between the front bump stops standard (new ) is 60mm ish ..
its plenty of hight and big flex my mate bought a oldman e 3'' kit and we tested it against suspenson stuffs kit and it made my mates truck look stock on flex ..

hey haggis its kieran. im about to put my 4inch kit in my ute ute within the next 2 weeks so your welcome to come for a look if ya want mate? better off with drop boxes over caster plates and also if you decide to go a 4inch lift your steering wheel will be out quarter of a turn which makes getting an adjustable drag link necessary. cheers kieran

patrol28 wrote:

4wd_Haggis wrote:this is a kit i am thinkin of gettin. what else do people reckomend i get along with it to finish the job properly. Also i was thinkin to go the efs extreme shock rather than the pro comps..

https://www.suspensionstuff.com.au/shop ... uqb4357qn3

thanks for the help.

hey bud if your looking for 4'' hight and trying to pass it off as a 3'' go the 3'' flexy set up shane has on that site its my truck in the pics and it sits 160mm between the front bump stops standard (new ) is 60mm ish ..
its plenty of hight and big flex my mate bought a oldman e 3'' kit and we tested it against suspenson stuffs kit and it made my mates truck look stock on flex ..

are you just running 3" flexies and es9000s, are you running the superflex arms iswell, just looking at getting a set of these flexies too

4wd_Haggis wrote:i was lookin into 4 inch try pass it off as a 3 inch and run 35s 36s. lets hope they dont wipe out a ruler. lol

you can run 36's with 2-3inch lift on GU.