Gday,
Few questions,
Anyone know if the gu gearbox and transfer from a 3.0L would bolt into a 3.0L navara? or even if just the transfer would bolt on? And can you flip transfers over? Ie if normal front shaft output is drivers side on a patrol can i turn it upside down so its passenger side to suit the nav?
Thanks in advance
Josh.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gu gearbox and transfer questions
Gu gearbox and transfer questions
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
76 Landcruiser tow rig
You cant flip the transfer case. Apart from the transmission being much larger and taller than the Navara trans--you might be able to use the Navara transfer case--which is the same as a Patrol except has front output on passengers side and no trans brake to bolt up to the Patrol gearbox rear extension housing. Even though its the same motor, not sure if they both use the same size bellhousing and clutch plate etc.
Nick
Nick
I think the bell housing patten is different, as the Navara use smaller bolts, (10mm) and the patrol is 12mm, you might have more luck fitting a 2.8 diesel or 3.0 petrol patrol box and transfer as this would have a closer bell housing pattern, (I have one for sale),
Phill
Phill
Living the dream on the hill that floods
Who is online
Users browsing this forum: No registered users and 0 guests