Outer Limits 4x4 Board

Hi everybody.

Just have a quick question. I aquired a set of stt's with internal beed locks off a mate and I was wondering how much pressure do I put into the beed locks??

My mate has had them sitting for a while and cant remember the instructions about them so I was hoping someone might know.

Any info will be greatly appriciated

Generally 38-45 psi, but at-least 4 psi greater than the tyre pressure.

Instructions all say 50psi which is what I set mine at and I have had no problems.
http://www.staunproducts.com/videos/Sta ... tional.wmv
Jas.

Nice. Thanks alot.