Page 1 of 1
how do you fit your window nets???
Posted: Wed Aug 06, 2008 3:57 am
by Nat84
hi guys
i'm hoping to enter my HJ60 Landcruiser in the Nissan Trials this yr and would just like to know how you fit your window nets to your window frams .....and if you can add pic or 2 that would halp 2
Nat
Posted: Wed Aug 06, 2008 6:31 pm
by thunder
screwed the bottom net into the door(into plastic) and the top is via the
velcro stuff around the top door frame.
Posted: Wed Aug 06, 2008 6:37 pm
by BigRedJeep
I use velcro straps and cable ties. Does the job just fine.
Posted: Wed Aug 06, 2008 8:03 pm
by sloshy
thunder wrote:screwed the bottom net into the door(into plastic) and the top is via the
velcro stuff around the top door frame.
x2
Posted: Wed Aug 06, 2008 9:04 pm
by macca81
curently have the bottom zip tied on, the top has a home made quick release rod that isnt very quick to release (was done because our scrute is a c0ckjaw who rekons its the only way it can be done) will soon have velcro straps instead
Posted: Wed Aug 06, 2008 9:09 pm
by bad_religion_au
you might want to check out here
http://www.nissanpatrolclub.org/trials/ ... rds-08.pdf .
things have changed this year, the standards say that the net must be easy and quick to remove. there are plenty of quick releases on the market. most are easy to replicate, and they work on a bar along the top that slots into angle steel/alloy, that can slide across and be pulled out easily as it's spring loaded, or have a split pin stopping it sliding. the other design uses a seatbelt like clip.
Posted: Wed Aug 06, 2008 9:35 pm
by Troll00
Cable tie the top to the frame, hockey strap the bottom to the door pad