Page 1 of 1
Baleno vs Vitara G16B ecu
Posted: Fri Aug 08, 2008 10:04 pm
by nicbeer
Hey,
Anyone know if the 96 AUTO G16B dizzy motor ecu is compatible to the vit G16b AUTO motor ecu?
more so as a spare ecu as well as i noticed on red book there is about a 3-4kw and nm increase as well as a 6000rpm revlimit on the baleno compared to the vit one. (5600rpm rev).
cheers
Posted: Sat Aug 09, 2008 8:14 am
by 11_evl
i have both dissys, the vit one is a 4 or 5 pin plug where as the bal one is a 2 wire plug
Posted: Sat Aug 09, 2008 9:47 am
by nicbeer
11_evl wrote:i have both dissys, the vit one is a 4 or 5 pin plug where as the bal one is a 2 wire plug
cheers for the info, i am grabbing that also.
this was about the ecu as the baleno also came out in the coil pack model in regards to the dizzy.
Posted: Sun Aug 10, 2008 2:32 pm
by nicbeer
anyone know? or will it be a case of plug and hope.
Posted: Mon Aug 11, 2008 8:36 pm
by PCRman
nic, came across info to the effec that by 96 your baleno ecu is prob. OBDII spec. Id reakon that would mean no go on the swap to a pre-96 vit motor.
http://www.obd-ii.de/tech_com-uebe.html
On another topic it look like a couple of guys in suzuki-forums.com have almost cracked the early90's vit OBDI output ito something that will be readable on a PC. I'm watching it with great interest and prepared to pay for one if they get it running. Check it out
http://www.suzuki-forums.com/suzuki-sid ... ces-9.html
Posted: Mon Aug 11, 2008 10:23 pm
by nicbeer
PCRman wrote:nic, came across info to the effec that by 96 your baleno ecu is prob. OBDII spec. Id reakon that would mean no go on the swap to a pre-96 vit motor.
http://www.obd-ii.de/tech_com-uebe.html
On another topic it look like a couple of guys in suzuki-forums.com have almost cracked the early90's vit OBDI output ito something that will be readable on a PC. I'm watching it with great interest and prepared to pay for one if they get it running. Check it out
http://www.suzuki-forums.com/suzuki-sid ... ces-9.html
hmmmm i am getting all the sensors and all that too. have to see once its out i think. i will talk to the boys down at suzuki also and see what the parts manuals say about the odb2 and that. i am hoping i can swap it all over than can do scan tooly
thats presuming all the sensors can bolt in easy and its only the ecu thats differrent in it self