Page 1 of 1
help 1.6
Posted: Wed Aug 13, 2008 7:11 pm
by zookkid
what ALL parts and mods do i need to do for a g13b carbie to a injected g16b conversion? i will be getting the adapter kit from Ben T in NZ,and alredy got a 2'' b/l in
cheers
Posted: Wed Aug 13, 2008 7:26 pm
by nicbeer
have u searched?
plenty of builds and buildups stating all the parts necessary.
Posted: Wed Aug 13, 2008 7:47 pm
by zookkid
yer searched heaps! from what im gathering:
-motor,ecu,loom.
-adapter kit
-body lift
-external fuel pump
-re wire
no??
Posted: Wed Aug 13, 2008 7:59 pm
by nicbeer
yes basically,
a few little things also but these are all answered in the searched threads.
vss,water pipes,maybe 2 fuel pumps, see how u go. clutch . . .
Posted: Wed Aug 13, 2008 8:14 pm
by BenT
zookkid wrote:yer searched heaps! from what im gathering:
-motor,ecu,loom.
-adapter kit
-body lift
-external fuel pump
-re wire
no??
+ clutch and flywheel from 1300
+ engine mounts and brackets from 1300
+ narrow body starter from 1600
+ vss sensor from 1600 dash (except 89 8V TBI - doesn't have one)
As nic said you'll also need and electric fuel pump. Either Vitara internal into a coily tank or external - eg VL commodore etc.
Water pipes and heater hoses etc should all go straight on.
Ben
Posted: Wed Aug 13, 2008 8:50 pm
by joeblow
external set-ups will need a low and high pressure pump.
Posted: Wed Aug 13, 2008 10:01 pm
by zookkid
whats a vss?? and you only need that with a tbi motor? i want a 1.6 16 vavle that isnt tbi is it?
so 2 fuel pumps? of what vehicles? 1 obviously a vl?is that the high pressure or low pressure one?
a narrow body starter? whats that? starter motor?
Posted: Wed Aug 13, 2008 11:19 pm
by suzukigav
Quick question while this thread is going... Why do people use the sierra gear box instead of just using the vit gearbox and shortening the jack shaft????
Posted: Wed Aug 13, 2008 11:46 pm
by joeblow
suzukigav wrote:Quick question while this thread is going... Why do people use the sierra gear box instead of just using the vit gearbox and shortening the jack shaft????
cause that would involve work! much better box i must admit.
Posted: Thu Aug 14, 2008 3:31 am
by zooker
zookkid wrote:whats a vss?? and you only need that with a tbi motor? i want a 1.6 16 vavle that isnt tbi is it?
so 2 fuel pumps? of what vehicles? 1 obviously a vl?is that the high pressure or low pressure one?
a narrow body starter? whats that? starter motor?
VSS is a speed sensor, it is not really needed, I dont run one with my 1.6 16v (I plan to get around to it eventually), If you really wanna bother just search "VSS" theres been a few threads on how to do it.
To do the fuel setup properly either an efi swb vitara fuel tank swap, or use a surge tank and 2 pumps (low pressure lift pump and high pressure vl fuel pump).
AFAIK yes you need to use the 1.3 starter motor
Heres a link to my thread which will have a few usefull pics, I already had the 1.6 carby but apart from starter/engine mounts/ gearbox adapter, the rest of the install will be the same.
http://www.outerlimits4x4.com/ftopic136 ... highlight=