Page 1 of 1
Wheel arch flares
Posted: Thu Aug 14, 2008 11:48 am
by Dalluke
Hey guys I have a 92 NH TD pajero with 33's and suspension lift, i am planing on lifitng body 2" and putting 33" muddies on it because i am getting a work vehicle and this will now be my play toy, i have a few questions regarding this.
1. Will 33 x 12.5 x 15 tyres fit and not rub (currently have 33 x 10.5 x 15 and they close but no rub)
2. Where can i get wheel arch flares from, just the non standard rubber ones you screw on yourself, or any other products that work on a budget
3. Any one want to buy my old 33" BFG all terrains when i get my new ones, 70% tread some wear and tear marks on 15" rims $700.00
Dave Luke
Posted: Thu Aug 14, 2008 1:07 pm
by Dexter
I got my rubber flares from ebay, but they also have the stuff at my local clark rubber.
Posted: Thu Aug 14, 2008 8:07 pm
by redreid1978
if ya lift it again just be carful the brake lines ??? and i m nearly shaw 33 12.5 15 will fit it ya have a least a 2 inch body and a 2 inch spring and torshion bar wind up .. if ya hside step they will have to go and maybe ya mud flaps to ?? i work at a tyre shop and i have never yet put 33 12.5 on a paj .. i know 32 11.5 will fit easy .. i have 31 11.5 15 on a 0 offset wheel the fit fine .. just stick out about 1 inch.. see how ya go?? post a note if they fit let us know
Posted: Thu Aug 14, 2008 8:24 pm
by bakerboy
33s should be fine with ya body and suspension lift, just get a patrol or cruiser offset
Posted: Fri Aug 15, 2008 6:25 pm
by icemanpaj
i just put some flares on my paj. the cheepest that i found is going into bunnings warehouse and getting garden edging. its about 10cm wide black UV resistant plastic. it was pretty cheep and will do all 4 wheel arches with one roll.
it looks great too.
Posted: Fri Aug 15, 2008 9:42 pm
by crh
There was a full set of original ones on Ebay a couple of days ago, rear as well as both front guards I think. Have a look.
Posted: Mon Aug 18, 2008 9:49 am
by dklyne454
icemanpaj wrote:i just put some flares on my paj. the cheepest that i found is going into bunnings warehouse and getting garden edging. its about 10cm wide black UV resistant plastic. it was pretty cheep and will do all 4 wheel arches with one roll.
it looks great too.
X2,
I had a NJ, and i used this stuff. fitted 33 x 12.5 no worrys with 2 plus 2 lift.
Now have a GQ, and just sold my factory flares and fitting more garden edging today. cheap, and easy to replace if you break or damage.